If given the opportunity to work for you, we hope that our services will more than exceed your expectations, and ultimately lead to the highest form of flattery, a referral to your friends and family.
Concrete & Clay Roof Tile: By far the most popular roof systems in the southwest. The roof tile is installed over a waterproofing membrane, traditionally an asphalt felt, and metal flashings. Although a tile roof initial installation is generally more expensive than other roofs, they are considered to be more cost effective over the long term due to lower maintenance and longer life expectancy.
Asphalt Shingles: Improvements in the composition of asphalt shingles over the last 20 years has made singles a practical alternative to tile roofs for homeowners on a budget. With a wide variety of designs, weights and colors shingles offer an attractive roof system to complement any house style.
Cedar Shakes & Shingles: Although once popular in this area, wood shakes and shingles are not as common as they were 20 years ago. The high cost of materials and labor puts this type of roof at the high end. Wood Shakes & Shingles do not last long in our hot desert sun and require frequent treatment to help extend the live of the product.
Standing Seam Metal Roofing: Standing seam metal roofs come in a wide variety of gauges, profile sand colors. At the low end are the 'Light Gauge' metals ranging up to the top of the line 22ga metals. Metal roof systems are more expensive than the other types listed above. However, with today's improved Kynar finishes, a properly installed metal roof system will outlast all others.
Builtup Roofing Systems: A low slope roof system used in both Residential and Commercial Construction. It typically consists of a fiberglass base sheet followed by layers of fiberglass ply sheet adhered with hot asphalt or cold applied adhesives. The top surface can be a granular surfaced cap sheet or roofing gravel embedded in hot asphalt. A very dependable, and affordable, roof system when properly maintained.
Modified Roofing Membranes: Similar to the Builtup Roof System, however, the fiberglass ply sheets and cap sheet are replaced with a single layer of Modified Bitumen Roofing Membrane typically reinforced with Polyester or Fiberglass. This membrane comes in several different types and can be applied with hot asphalt (SBS), heat applied (APP) or self adhering (SA). This roof system is most often used when dealing with smaller roof decks or where access to the roof areas is limited.
Single Ply Roofing Systems: Single Ply roof systems are most often installed on larger commercial projects. There are many different product types but the most common ones are PVC, TPO & EPDM. They can be mechanically attached, fully adhered or ballasted. Their ease of installation and low cost of repairs/maintenance make them the choice of most commercial architects.
Foam Roofing Systems: Spray Polyurethane Foam (SPF) is a low slope roof system used in both Residential and Commercial Construction. It typically consists of closed cell sprayed polyurethane foam and a top protective layer of elastomeric coating. This system is effective on roof decks with poor drainage. Drawbacks to a foam roof are that they require periodic recoating and are susceptible to impact damage from hail.
Serving The Phoenix Area Since 1971
Call Us At 602-254-8248 To Schedule A Free Initial Consultation.